Analyze Salt Mixture Sample 3(S3) by Dry and Wet Tests: Complete Guide

APPARATUS REQUIRED:

i) Test tube

ii) Conical flask

iii) Beaker

iv) Funnel

CHEMICALS REQUIRED:

i) Sample (S₃)

ii) AgNO₃

iii) dil.H₂SO₄

iv) Conc.H₂SO₄

v) BaCl₂

THEORY:

Qualitative analysis concerns the finding out the Constituent present in the substance. The basis of Qualitative inorganic analysis is the properties of ions present in the salt. Analysis is done in dry and wet ways.

i) Dry test: In dry test characteristic properties of a substance when subjected to the acids,alkalis, oxidizing and reducing agents generally with references to its Colour, odour and state are the basis of analysis. Dry test is always performed before a wet test.

ii) Wet test: In wet tests radicals are detected in solution by their ionic reactions. Acid radicals are identified by their reaction with the particular reagent metal ions are classified into dermite analysis group.

PHYSICAL PROPERTIES:

Sample: S₃

Colour: Greenish white

State: Crystalline solid

Solubility: Soluble in water

Odour: Characteristic odour.

A) Dry test for Acid Radicals:

Experiment	Observation	Inferences
i) Action of dil. H₂SO₄: 0.2 gm of substance in a test tube was treated with 2-3 ml of dil H₂SO₄ and warmed gently.	Coloured gas with pungent smell was observed and no effervescence took place.	Absence of CO₂^–, SO₂^– , S^—, NO₂^–
ii) Action of conc.H₂SO₄: 0.2g of substance in a test tube was treated with conc.H₂SO₄ and warmed gently.	Pungent acid turns evolved often coloured brown by NO₂ and Coloured in addition. of copper chips.	Presence of NO₃^–

Reaction Involved:

NaNO₃ + H₂SO₄ ————-> NaHSO₄ + HNO₃

2HNO₃ ————————> H₂O + 2NO + 3O

3Cu + 3O ———————> 3Cuo

3CuO + 6HNO₃ ————-> 3Cu(NO₃)₂ + 3H₂O

3NaNO₃ + 8H₂SO₄ + 8Cu + O₂ ———-> 8NaHSO₄ + 8Cu(NO₃)₂ + 4H₂O + 2NO₂

B) Wet test for Acid Radicals:

Wet test are carried out with the solution of salt:

Experiment	Observation	Inferences
i) AgNO₃ Test: 1 ml salt solution was taken in a test tube and 1 ml of dil.HNO₃ then a few drops of AgNO₃ solution was added.	White ppt was observed but didn’t dissolve in NH₃.	Absence ofCl^–, Br_^–, and I^–.
ii) BaCl₂ Test: 1 ml of salt solution was taken in the test tube and BaCl₂ solution was added.	White ppt was observed and Insoluble in dll.HNO₃	Presence of SO₄^—.
iii) Test for Nitrate: 2ml of salt solution was taken in the test tube, 2 ml of conc. H₂SO₄ was added slowly cooled and freshly prepared FeSO₄ Solution was poured through the wall of the tube keeping it in an inclined position.	Brown ring was formed in the contactof two solutions.	Presence of NO₃^– .

Reaction of SO4^—:

Na₂SO₄ + BaCl2 ———> BaSO₄ + 2NaCl

Reaction of NO₃^—:

NaNO₃ + H₂SO₄ ———> NaHSO₄ + HNO₃

6FeSO₄ + 2HNO₃ + 3H₂SO₄ ——–> 3Fe(SO₄)₃ + 2NO + 4H₂O

FeSO₄ + NO ————–> [FeCNO]SO₄

C) Test for Basic RadicalS:

Dry test for basic radicals:

Experiment	Observation	Inferences
0.29 of the substancewas heated in a dry test tube and change that took place was observed.	i) Sound was not produced.	i) Absence of NaCl, Pb(NO₃)₂.
	ii) Fusible residue was observed.	ii) Maybe Mg or K salt.
	iii) The color was not changed.	iii) Absence of Zn, Pb,Mn, CO.
	iv) On strong heating the color changed from blue to black.	iv) May be Cu salt.
	v) Ammonia gas evolved turning moist red litmus to blue.	v) May be ammonium salt.

D) Wet Test for Basic Radical:

Wet test is carried out with the solution of substance 0.5 g of the given salt mixture was dissolved in suitable solvent and diluted to about 15 ml which was used for basic radical separation.

Group separation of cation:

Dil.HCl was added drop by drop to the salt solution, but ppt was not formed.

Absence of group (I) metals:	HCl concentration was adjusted to 0.3 N Heated to boiling and H₂S gas was passed. Black ppt was formed..
Presence of group (II) metals:	The solution was boiled to remove H₂S 1-2 ml of conc. HNO₃ was added in boiled 1-2g of NH₄Cl and dil NH₃ was added till alkaline and then 1 ml in excess and boiled for 1 min. No.ppt was formed.
Absence of group (III A) metals:	2-3 ml of dil NH₃ was added and heated then H₂S gas was passed. No ppt was formed.
Absence of group (III B) metals:	H₂S was boiled off and concentrated to half volume 0.2g of NH₄Cl was added, made alkaline with few drops of conc.AlH₃ and (NH₄)₂CO₂ added with stirring in slight excess kept. Kept in a water bath at 50-60°C for 5 min. No ppt was observed.
Absence of group (IV) metals:	Na₂HSO₄ was added 2 ml of conc.HNO₃ was added evaporated continuously to dryness until no shite fumes white residue forms presence of group V metals.

Confirmatory test for group (II) metalion:

The ppt was transferred into the porcelain basin 5 ml of dil HNO₃ was added, boiled for a few minutes and then the solution was washed with filter paper and water. There was no residue and filtrate was a bluish green presence of Co⁺⁺ . The filtrate was then treated with dil.H₂SO₄and NH₃, no charge was observed, so it was heated with acetic acid and ferricyanide solution where reddish brown ppt. was formed. Hence the presence of Cu⁺⁺ was confirmed.

Confirmatory test for group (III B) metalion:

The ppt was transferred into a small beaker then dil.HCl was added, Stirred and filtered. Then in filtrate excess of NaOH was added then 1 ml of 3% H₂CO solution was added after removing H₂S gas. Then again after cooling and adding NaOH and H₂O₂ it was boiled and filtered again. The filtrate may contain stat Na₂ (ZnO₂). So it was divided into two parts. The one part was acidified with dil.acetic acid and H₂S was passed whereas another part was acidified with acetic and potassium ferrocyanide was added where in both cases with ppt. was observed. Hence the presence of Zn⁺⁺ was confirmed.

Reaction Involved:

A) For Acid Radical

a) wet ways

i) NaCl + H₂SO₄ ————-> Na₂SO₄ + HCl ↑

2Na x + H₂SO₄ ————> Na₂SO₄ + 2x ↑

ii) NaNO₃ + H₂SO₄ ———-> NaHSO₄ + HNO₃

2HNO₃———————> H₂O + 2NO + 3O

3Cu + 3O —————-> 3CuO

3CuO + 6HNO₃——–> 3Cu(NO₃)₂ + 3H₂O

8NaNO₃ + 8H2SO₄ + 3Cu + O₂———-> 8NaHSO₄ + 3Cu(NO₃)₂ + 4H₂O + 2NO₂

b) Wet ways

i) AgNO₃ + Cl^– ———> AgCl + NO^–₃

AgCl + 2NH₄OH ——> [Ag(NH₃)₂]Cl + H₂O

[Ag(NH₃)₂]Cl + HNO₃ ——-> AgCl ↓ + NH₄NO₃

ii) NaNO₃ + H₂SO₄ ——–> NaHSO₄ + HNO₃

6FeSO₄ + 2HNO₃ + 3H₂SO₄ ———> 3Fe₂(SO₄)3 + 2NO + 4H₂O

FeS_O4 + NO ———-> [Fe(NO)]S_O4

B) For Basic Radicals:

Dry test:

RESULT:

Hence, by the complete analysis of given mixture, the acidic radical present on mixture were Cl^– and SO₄^— and basic radical were Cu⁺⁺ and Mg⁺⁺ respectively.

CONCLUSION:

In this way, by the complete analysis of salt, we can detect the acidic and basic radicals respectively.

PRECAUTION:

– Apparatus should be handled carefully.

– Chemicals should be added in the proper amount.

– Boiling and cooling should be done carefully.

– All the tests should be done carefully and properly.

Go Back

Go Back

Analyze Salt Mixture Sample 3(S3) by Dry and Wet Tests: Complete Guide

APPARATUS REQUIRED:

CHEMICALS REQUIRED:

THEORY:

PHYSICAL PROPERTIES:

A) Dry test for Acid Radicals:

Reaction Involved:

B) Wet test for Acid Radicals:

Reaction of SO4^—:

Reaction of NO₃^—:

C) Test for Basic RadicalS:

D) Wet Test for Basic Radical:

Reaction Involved:

RESULT:

CONCLUSION:

PRECAUTION:

Go Back

Go Back

APPARATUS REQUIRED:

CHEMICALS REQUIRED:

THEORY:

PHYSICAL PROPERTIES:

A) Dry test for Acid Radicals:

Reaction Involved:

B) Wet test for Acid Radicals:

Reaction of SO4—:

Reaction of NO3—:

C) Test for Basic RadicalS:

D) Wet Test for Basic Radical:

Reaction Involved:

RESULT:

CONCLUSION:

PRECAUTION:

Reaction of SO4^—:

Reaction of NO₃^—: